Direct Acting Brass Material 50mm Solenoid Valve 2W500-50
Model No.: 2W500-50
Direct acting brass material 50mm Solenoid Valve 2W500-50
Material: Brass or SS
Can be used to control air, water, gas, oil.
Adopting straight-action diaphragm structure without pressure starting enlarges its applicable scopes.
Adopting plate diaphragm structure with reliable start and close lengthens the service life of the product.
Selecting encapsuled coil improves the safe application of this product under many environments.
Model 2W160-10 2W160-15 2W200-20 2W250-25 2W350-35 2W400-40 2W500-50
Working Medium Air, Water, Oil, Gas
Motion Pattern Direct Drive Type
Type Normal Close Type
Aperture of Flow Rate mm 16 20 25 35 40 50
CV Value 4.8 7.6 12 24 29 48
Joint Pipe Bore 3/8" 1/2" 3/4" 1"11/4" 11/2" 2"
Operation Fluid Viscosity 20CSTBelow
Working pressure Air: 0~1.0Mpa\ Water: 0~0.7Mpa\ Oil: 0~0.7Mpa
Max. Pressure Resistance 1.0Mpa
Operating Temperature -5~80 degree
Voltage Range: 10%
Material of Body Brass
Material of Oil Seal NBR or VITON
|Working Medium||Air, Water, Oil, Gas|
|Motion Pattern||Direct Drive Type|
|Type||Normal Close Type|
|Aperture of Flow Rate mm||16||20||25||35||40||50|
|Joint Pipe Bore||3/8″||1/2″||3/4″||1″||1 1 /4″||1 1 /2″||2″|
|Operation Fluid Viscosity||20CSTBelow|
|Working -pressure||Air: 0~1.0Mpa. Water: 0~0.1Mpa. Oil: 0~0.1Mpa|
|Max. Pressure Resistance||1.0Mpa|
|Operating Temperature||-5~80 degree|
|Material of Body||Brass|
|Material of Oil Seal||NBR or VITON|
Contact us if you need more details on Solenoid Valve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about 2W500-50 Solenoid Valve、Direct Acting 50mm Solenoid Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.
Premium Related Products