High Quality Pneumatic Return Actuator, Quarter Turn Pneumatic Actuator, Quarter Turn Ball Valve Actuator Suppliers in China

Home > Products > Pneumatic Actuator Ball Valve > Pneumatic Actuators > Double Acting Pneumatic Valve Actuator (AT Series)

Double Acting Pneumatic Valve Actuator (AT Series)

Basic Info

Model No.:  AT-32

Product Description

Model NO.: AT-32 Work Temperature: High Temperature Pressure Range: 0.25~0.8mpa Life Time: More Than 1 Million Time Condition: New Specification: CE, ROHS, ISO9001 HS Code: 8481804090 Brand: Klqd Material: Aluminum Rotate Range: 90 Deg Type: Pneumatic Actuator Trademark: KLQD Origin: China AT pneumatic valve actuator which compact design, long life service, high quality, gear and gear rack.

This product is used for 90° Rotationally valves, such as: Ball vales, butterfly valves, plug valves etc. My company put product

Quality as the first task, adopts the most advance production and technology, strong than similar product on both product quality and performance.

At series air operated actuator is the compact, the life is long, the quality is high, rack's-like air operated actuator.

Pressure range:
Max: 10bar

Acting type: Single or double

Rotate angle: 90 deg

Life of AT pneumatic valve actuator
More than 1 million time
Double Acting Pneumatic Valve Actuator (AT Series)
Double Acting Pneumatic Valve Actuator (AT Series)
Double Acting Pneumatic Valve Actuator (AT Series)
Features 
1. Dual Position Rack 
2. Integrated Design 
3. High Output Power 
4. Integrated Design 
5. Long Service Life 
6. Stainless steel fasteners for long term corrosion resistance 
7. The interface between piston, pinion and body is made of low friction material 
 
Specifications 
1). Pressure Range: Max. Working pressure 10bar 
2). Air pressure: 2.5bar~8bar 
3). Adjustment Range: 90° ± 5° 
4). Ambient temperature: -20 ~ +90° C 
5). Type: Single-acting (spring return), double-acting 
6). Optional accessories: Solenoid valves, limited switch, electric position 
7). Lubrication: All the moving parts are coated with lubricants, extending their service life 
8). Life Time: One million time 
 
Standards 
A. Interface between actuator and valve: 4 or 8 bolt orifices according to DIN/ISO 
5211, the axle assembles orifice according to DIN 3337 
B. Interface between actuator and control valve: 7100 D/S-7350 D/S according to 
NAMUR or VDI/VDE 3845, 7040 D/S-7090 D/S connecting via the adapter plate 
C. Interface between actuator and signal box: According to VDI/VDE 3845 
 
Introduction 
I. Actuator Body 
Boy material is alumina alloy. Internal and external surface are treated with anodize oxidation and polishing. Outer surface is nickle plated so that the anti-corrosion fiction of actuator and minimum friction against pistons can be guaranteed. 
 
II. End Cover 
End cover material is die-casting aluminum End cover is treated with epoxy polyester so as to best guarantee the anti-corrosion performance. 
 
III. Drive Shaft 
The drive shaft material is medium carbon steel with fine processing and nickle plating so that the pistons have better quality in anti-corrosion, anti-friction, etc. 
 
IV. Piston 
Piston material is die-casting aluminum alloy. Maximum torque can be output when the actuator is actuated with certain pressure. 
 
V. Piston Seal 
NBR-70 rubber sealing is applied to ensure the normal and reliable performance of actuator under normal temperature. FPM can be also applied according to clients' requirements. 
 
VI. Travel Adjustment 
Plus/Minus 5 degree travel can be adjusted through the two bolts. 
 

Contact us if you need more details on Pneumatic Valve Actuator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Valve Actuator、Air Pneumatic Actuator. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Pneumatic Actuator Ball Valve > Pneumatic Actuators